most fatal fires occur when people are asleep in their homes, as smoke can lull a person into a deep slumber. Ever wonder how your walls would protect you? While no practical building material is truly fireproof, well-constructed houses and buildings can help prevent such tragedies by using materials that are relatively fire-resistant.

 

NEW WEAPON IN FIRE PREVENTION "EXON GUARD"

 

  1. CF-500 Anti-fire cellulose materials
  2. CF-600 Anti-fire paint
  3. CF-700 High strength anti-fire paint
  4. CF-800 Cement fireproof coating

Anti-fire CF-500

The 500-CF anti-fire coating is suitable for high-absorption cellulosic material. This non-toxic coating is non-toxic and non-corrosive, easy to use and environmentally friendly. This product can be mixed with different materials such as anti-fungus and anti-termites (powder only).

After spraying the liquid and evaporating it, the main materials remain high on the surface. Given that 500-CF is the base of water, to prevent the washing and exiting of fire-retardants, according to the application and type of products Cover them with suitable materials such as sealers or waterproof or water-resistant coatings. The product obtained after using the 500-CF fire-retardant coating does not flare even if exposed to fire. It only turns into charcoal and ash.

Application:

500-CF can be used for the following materials: wall panels, plywood, flooring, wooden frames, all kinds of textiles, curtains, carpets and mugs, floor coverings and cellular walls.

Anti-fire paint CF-600

600-CF Anti-fire paint coatings are expandable and puffy coatings. This coating is about 1 mm thick and can be used as the last coating, because it has a polished and integrated look. A coating of 600-CF against fire generates about 15 minutes of resistance.

When exposed to heat, these materials release and heat in the form of a series of chemical reactions and produce a coil-insulating layer that is 20 times the initial value of the paint. To come These coatings are used to protect metal structures and interior surfaces of the building.

Application:

The 600-CF can be applied to the surfaces of paper, fabric, wood, leather and other materials until the fire is capable of burning. Also, when burned in the flames, their burning is very slow.

Anti-fire paint CF-700

The 700-CF High strength anti-fire color coating begins to inflate as soon as the first flame reaches its surface and creates a black solid foam with a thickness of about 2.5 cm, which has a puffy foam containing millions of small, closed and fireproof cells. Is.

Foam as an insulator postpones the flame contact with the substrate and prevents it from being hot and flammable as a delayed barrier. This insulating foam blocks about two hours from reaching the bottom surface and delaying the spread of the flame, which is itself a vital unforeseen opportunity during a fire crisis. Due to the accelerated execution time, occupation Less space, smooth surface and no extra cost to smooth the level and low consumption per unit area, the use of fireproof paint is highly economical and economical.

Application:

700-CF on all surfaces including metal structures, concrete, plaster, cable, wood and other applicable surfaces.

Cement fireproof CF-800

Cement fireproof coating 800-CF is a type of fire resistant refractory cover with expanded aggregates such as perlite and vermiculite; hydraulic binders such as gypsum and cement, and a cementitious agent. These materials are first pre-filled with water to achieve a suitable concentration. Blended and then sprayed on the surfaces by hand or machine. These coatings can be applied on the interior and exterior surfaces of buildings and metal structures and can protect the structure against fire for up to 4 hours.

پوشش ضدحریق تولیدو اجرا شرکت اکسون پناه